Inspection Engineering has excess inventory of new gages, gages used for sales demonstration, and pre-owned equipment. These items may carry limited warranty and are sold in as-is condition. |
| Demonstration CMMs: |
Zeiss DuraMax |
- Measuring Range: 20x20x20"
- Drive: C99
- Probe: VastXXt
- Software: Zeiss Calypso
- Accuracy: 2.4+L/300
- Warranty: 1 year
- Built: 2010
|
 |
|
Zeiss Contura G2 CMM |
- Measuring Range: 40" x 64 ” x 22” (10/16/6)
- Renishaw TP20 sensor
- Sensors: ViScan and VASTxxt
- Software: Zeiss Calypso
- C99 CNC Controller
- Accuracy: MPE 1.9 + L/300 um
- 6 Month Warranty
- Manufacture date: 2010
|
 |
|
| Zeiss Spectrum II |
- Measuring Range 28"x40" (7/10/6)
- Zeiss RDS with a Renishaw TP20
- Software: Zeiss Calypso
- C99 CNC Controller
- Accuracy 2.4 + L/250
- Built 2011
- 1 year warranty
|
 |
|
Helmel Checkmaster
112-10 Z |
- Measuring Range: 12" x 12” x 10”
- Probe: MIP
- Software: Geomet or QC300
- Control: Manual
- Accuracy: 5um + L/200
- Warranty: 3 months
Buy or Rent! |
|
|
Prismo 12/18/10 |
- Measuring Range: 48 " x 72” x 40”
- Probe: Vast Gold
- Software: Zeiss Calypso
- Drive: C99
- Accuracy: 1.8 + L/300
- Warranty: 1 Year
- Built: 2010
|
|
|
| |
| Pre-Owned CMMs: |
Zeiss C400 |
- Measuring range 15 X 18 X 12
- Air Bearings
- CNC Controller w/Joysticks
- 3/8"-16 Clamping inserts
- Renishaw PH6 electronic touch probe
- Usoft Software
- Installation and A2LA Calibration
- Calibration Sphere
- 6 Months Parts and Labor
Buy or Rent! |
|
|
|
- Measuring Range: 35" x 48" x 26"
- Probe Sensor: Vast Gold
- Software: Zeiss Calypso
- Drive: C99 Controller
- Accuracy: 2.7 +L/300
- Warranty: 1 year factory
- Built: 1998
|
 |
|
Zeiss Eclipse 7/7/6
|
|
Zeiss Eclipse 7/7/6
|
|
Zeiss Contura 10/12/6
SOLD
|
|
| Zeiss Vista 16x20" |
- Measuring Range 16x20x14"
- Probe Sensor: Renishaw MH20I - TP20
- Software: Zeiss Calypso
- Drive: Zeiss C99 Controller
- Accuracy: 2.9 + L/250
- Warranty: 1 year
- Built 1999
|
|
|
| Zeiss UMC 850 (Setup for Gear Inspection!) |
- Measuring Range: 8/12/6
- Probe Sensor: U Type
- Software: Zeiss GearPro and Calypso
- Controller: Zeiss C99 Controler
- 4th Axis: RT05-300 Rotary Table
- Accuracy: 3.0 + L/200
- Warranty: 1 Year
|
|
|
Eclipse 550
|
|
