Optical
Gaging Products
SmartScope®
Quests are high-accuracy
metrology systems designed to use a variety of sensors for full three-dimensional
measurement. Quest offers the best optical performance available. Accurate measurements
require images, and Quest TeleStar™ 10:1 zoom lens deliver just that. TeleStar
lenses are completely telecentric and automatically calibrated throughout their
range, for distortion-free, high-fidelity images- perfect for high-accuracy metrological
applications. MeasureMind® 3D MultiSensor metrology software is standard on
all SmatScope Quest systems. | |
 | SmartScope Quest 300 SmartScope Quest 300 offers the measurement versatility and accuracy needed for the most critical, demanding parts. With an expansive 300x300x250 mm (12x12x10") XYZ measurement volume to accommodate large parts, it combines state-of-the-art video and autofocus to deliver high productivity. |
 | SmartScope
Quest 450 SmartScope
Quest 600 |
 | SmartScope
Quest 650 The Quest 650 offers the largest measurement volume of any standard metrology system from OGP. Linear motors move the XY stage at an impressive 400 mm/sec. XY acceleration is rated at 0.25g, while Z axis speed is 200 mm/sec for highest throughput. The thermal and damping characteristics of the Meehanite® bridge contribute to the volumetric accuracy of the 650. Quest 650 is also available with an optional 400mm of Z-axis travel. |
SmartScope®
Quest™ 250, 450, 600, 650
have the following features: Optics, illumination, and video • High precision, parafocal, telecentric optical system, featuring 10:1 TeleStar™ telecentric zoom lens or TeleStar fixed magnification optics including 4x objective lens (Quest 250 models only) • High-resolution color video camera (with zoom lens) High-resolution grayscale camera (with fixed optics) • Substage illumination, coaxial surface illuminator, fiber optic ring light, and programmable LED SmartRing Light with eight sectors and six rings for complete control of illumination direction and incidence angle Computer and software • 2.4 GHz Pentium 4 with 512 MB RAM, 1.44 MB floppy drive, 40 GB hard drive (typical), CD-ROM drive, on board 10/100 LAN, Microsoft® Windows™ 2000, USB, serial, and parallel ports • Easy to use MeasureMind 3D Multisensor software with full 3D geometric functionality and multi-sensor support. The 3D feature set includes cylinders, cones, spheres and planes, in addition to intersections, relationships, centroid, and advanced search functions. Part model may be displayed in wire frame or solid, and may be interactively zoomed, panned, and rotated. A highly flexible 3D datum environment provides leveling, rotation, and origin definition. • OGP exclusive full field of view edge analysis with tools for arc, circle, line, edge trace, minimum point, maximum point, average point, centroid, and focus. Algorithms are automatically optimized based on the unique characteristics of each edge, improving accuracy and providing unsurpassed performance. • Advanced Z-axis autofocus performance • Full multi-sensor capability with optional laser and touch probe sensors • Image storage, overlay, and comparison capability (reference images can be stored on hard or floppy disk, and superimposed over test images for easy comparison) • Computer generated, calibrated targets for accurate alignment of features and edges to the optical centerline • Extensive user documentation and on-line Help functions Measuring stage and motion control • Precision mechanical bearing XYZ transport with 0.000004" (0.1 µm) resolution scales • DC servo motor drives and three-axis joystick control • Hardened worktable with fixturing holes and removable stage glass Installation, training, and warranty • Installation and calibration by an A2LA certified factory service engineer • Full one year on-site warranty | |
To receive more information, please call 440-892-9277