Emuge Products

The GT go/no-go thread depth plug gauge permits the gauging of threads and the measuring of thread depth in one single work process.
The typical application for the GT thread depth plug gauge is in components with identical thread sizes and different thread depths, and in the setting of thread depth in all kinds of internal thread production.
By pushing the spring-loaded scaled sleeve into the handle, the fully cut thread depth can be read off quickly and precisely.
In addition, the GT plug gauge will of course meet all the specified requirements and gauging criteria as specified in DIN ISO 1502 for standard go/no-go thread plug gauges.

Instructions for use:
In order to determine the exact thread depth, we recommend screwing in the GT plug gauge “digital” down to the very bottom of the thread. The full finished thread depth can then be read off by resetting the display to zero (RESET) and by subsequent unscrewing of the GT plug gauge from the workpiece. This thread depth value can be read off with an accuracy of 0.01 mm. With this procedure, gauging becomes possible even in concealed locations.

Characteristics - GT thread depth plug gauge “digital”:

Large, high-contrast LCD display with numerals 7.5mm high
Casing and buttons are made of Ultradur® material with excellent chemical resistance
Water-proof measuring system FPS (fluid-protected measuring system) with sealed casing. Protection system IP65 acc. EN 60529

mm/inch
Reference lock function
ON/OFF
Reset

To request a quote, click here or call 440-892-9277.

To receive more information, please call 440-892-9277